Process calibrators
ADT 222 A Multifunction Process Calibrator
- • Sourcing, simulating and measuring pressure, temperature and electrical signals
- • Smartphone-like menu and interface make the operation simpler and easier
- • The internal cold junction compensation sensor can be re-calibrated at ice point by users
- • Ultra-compact, 3.9” x 7.6” x 2.0”, and 1.6 lb (0.7 kg)
HT8000 - Portable digital process calibrator
- Generation of output voltage signal with amplitude up to 10VDC
- Voltage measurement up to 10VDC
- Generation of output current signal with amplitude up to 24mADC
- Current measurement up to 24mAVDC
- Current measurement under percentage format (4-20mA)
- Loop current measurement of external transducers
- Simulating of an external transducer
- Fuse protection on inputs
HT8051 - Professional process calibrator with adjustment knob
- Generation of output voltage signal with amplitude up to 10VDC
- Voltage measurement up to 10VDC
- Generation of output current signal with amplitude up to 24mADC
- Current measurement up to 24mAVDC
- Current measurement under percentage format (4-20mA)
- Adjustment selector with high sensitivity
- Up to 3 available automatic ramp
- Loop current measurement of external transducers
- Simulating of an external transducer
- Power supply with Li-ION rechargeable battery
- Backlight
- Auto Power OFF
HT8100 - Professional TRMS multimeter + Process calibrator
- DC/AC TRMS Voltage
- DC/AC TRMS Current
- AC+DC measurements
- Generation of output current signal up to 24mA DC
- Selection 0-20mA and 4-20mA output
- Up to 4 available automatic ramp
- Loop current measurement of external transducers
- 250Ohm HART feature
- Simulating of external transducers
- Resistance and continuity test
- Diode test
- Frequency
- Data HOLD
- MIN/MAX/AVG
- Manual/Autorange
- Relative measurements
- Autotest for automatic detection of AC or DC parameters
- Autobacklight
- Internal memory
- Auto Power OFF
Process Calibrator - Multimeter IOC 502T
The IOC is a 502-t calibrator multimeter to generate currents 0/4-22mA in Source or Sink Mode and voltages from 0-14V. At the same external voltages in ranges of
Process Calibrator IOC 505
Model OC505 is a calibrator multimeter to generate currents from 0 to 22mA in Source Mode or Sink Mode and voltages up to 25VDC. At the same voltages in external fields to
C.A 1621 - Temperature calibrator for thermocouples (J, K, T, E, R, S, B, N)
- The C.A 1621 is capable of measuring and simulating up to 8 types of thermocouple as well as a voltage in mV.
C.A 1623 calibrator for resistance temperature-probes
- The C.A 1623 is capable of measuring and simulating up to 7 different types of probes and a resistor
C.A 1631 - voltage/current process-signal calibrator
- The C.A 1631 is a measuring instrument. It can be used for measurement or to deliver a DC current loop between 0 and 24 mA and a DC voltage between 0 and 20 V.
Fluke 771 mA Process Clamp Meter
Measure 4-20 mA output signals from transmitters without breaking the loo.
Fluke 772 and 773 mA Process Clamp Meter
If you need more time in your busy day check out the Fluke 772 and 773 mA Clamp Meters. They are designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.
Multifunction Calibrator IOCM 140
Bus compatible multifunction calibrator for precise generation DC- und AC- Voltages and Currents, Power and Energy, Temperature, Resistors, Capacitors and Frequencies.
IOCM 140-i - Multifunktionskalibrator
- Bereiche:
- DC: 0µV...1000V, 0µA...20A
- AC: 1µV...1000V, 1µA...20A.
- DIN-Thermocouples R,S,B,J,T,E,K,N
IOCM 143 - Multifunction Service Calibrator
- DC and AC Voltage up to 750 V
- DC and AC Currents up to 2 A
- Resistors 10 Ω to 100 MΩ
- Thermocouples R,S,B,J,K,T,E,N
- Supply 115/230V 50/60 Hz
- RS 232 or IEEE488
IOCM 142 - Multifunktionskalibrator
- DC und AC Spannungen bis 1000V 15ppm/Jahr
- DC- und AC- Ströme bis 30A
- Leistungen / Energie bis 240V/20A
- Prozessmultimeter eingebaut
- RTD und Thermoelemente
- Widerstände bis 1000 MOhm, Kapazitäten bis 100µF
- Kalibrierfrequenzen bis 20MHz
- GPIB und RS232 Schnittstellen
- Kalibration mit Digitalkamera
IOCM 142i - Multifunktionskalibrator
- DC- und AC- Spannungen bis 1000V 15ppm/Jahr
- DC- und AC- Ströme bis 30A
- DIN- Thermoelemente
- GPIB und RS232 Schnittstellen
- Kalibration mit Digitalkamera
IOCM 151 - AC-DC Stromkalibrator
- AC und DC Ströme 8mA bis 120A, max. 8Vp-p
- Frequenzbereich 16Hz bis 1kHz
- Beste Genauigkeit 0.035%
- Simulierter Strom- und Transkonduktanzverstärker
- Eingebauter Multimeter
- GPIB Datenbus
IOCM 133 C - Dreiphasen Energiekalibrator
- Dreiphasen Kalibration bis 280VDC bis 600VAC und 30A DC/AC
- Leistungen VA,W oder VAr
- Energie kVAs, KWs, KVArs
- Phasenverschiebung 0 - 360°
- Frequenzbereich 15 - 1000 Hz
- IEEE 488, RS232, Ethernet
- Automatischer Kalibrierablauf
IOCM 133 - Leistung und Energie Kalibrator
- Ein- bis Dreiphasen Kalibration bis 280V und 30A DC und AC
- Leistungen und Energie
- VA,W oder VAr
- Energie kVAs, KWs, KVArs
- Phasenverschiebung 0 - 360°
- Frequenzbereich 16 - 1000 Hz
- IEEE 488, RS232, Ethernet
- Automatischer Kalibrierablauf
- Modularer Aufbau
CX 1651 - Multi-function laboratory calibrator
- The C.X 1651 multi-function calibrator is suitable for calibrating all types of measurement instruments and includes an integrated multimeter.
- Its programmable tester function allows up to 10 test steps to be executed automatically! As well as the standard electrical parameters, it can also generate the parameters for specific temperature and energy applications.
- Designed for measurement instrument manufacturers, laboratories, after-sales service departments and engineering departments, the C.X 1651 is ideal for instrument quality certification, etc.
- Ergonomic: easy to learn, large colour LCD screen, display of menus, parameters and other useful information, keys for direct access to the principal functions.
- Multiple signals: AC/DC voltage and current generation, non-harmonic signals, square signals, with programmable amplitude & frequency, simulation of resistors or capacitors, simulation of RTD thermometers and thermocouples (R, S, B, J, K, T, E, N).
- Integrated multimeter function for testing and calibrating transmitters and controllers without any additional equipment.
